Poly(1,2‑dithiolane) Vaporizes at 90 °C and Reassembles on Cooling
Chemical engineers at the University of Surrey have created a polymer that sublimates at roughly 90 °C, bypassing the liquid phase, and then reforms into its original solid structure as it cools. The material, identified as poly(1,2‑dithiolane), was demonstrated on a rolled‑up filter paper coating that lost its waterproof layer when heated and regained water‑absorption once the temperature dropped.
Key Takeaways
- The polymer poly(1,2‑dithiolane) sublimates at about 90 °C and reassembles without passing through a liquid state.
- Researchers applied the polymer as a coating on filter paper, showing reversible loss and recovery of waterproofing.
- The work was led by chemical engineer Touseef Kazmi, with contributions from Peter Roth, at the University of Surrey in the United Kingdom.
| Metric | Value | Why it matters |
|---|---|---|
| Polymer name | poly(1,2‑dithiolane) | Enables reversible sublimation for reusable coatings. |
| Sublimation temperature | ≈ 90 °C | Allows transition without a liquid intermediate. |
| Research institution | University of Surrey (UK) | Provides a leading platform for polymer innovation. |
| Lead author | Touseef Kazmi | Directed the study and reported the findings. |
What the polymer does
Poly(1,2‑dithiolane) transitions directly from solid to gas when heated to about 90 °C, a process known as sublimation. Upon cooling, the vapor molecules reorganize, recreating the original solid polymer matrix.
Fast‑acting reversible coating: The material can be applied, removed by heat, and restored without chemical waste.
Mechanism of reversible sublimation
The polymer’s molecular structure contains dithiolane rings that break apart at the sublimation point, releasing monomeric units into the gas phase. As temperature falls, these units recombine, reforming the cyclic architecture and solidifying the material.
Self‑healing potential: Because the polymer reassembles itself, it could serve as a basis for materials that repair after thermal exposure.
Proof‑of‑concept demonstration
Researchers coated rolled‑up filter paper with the polymer, creating a waterproof barrier. Heating the paper to the sublimation temperature removed the barrier, allowing the paper to absorb water again. Cooling the paper restored the original coating, demonstrating repeatable performance.
Researchers behind the discovery
Lead author Touseef Kazmi, a chemical engineer at the University of Surrey, oversaw the experimental design and data analysis. Peter Roth, also a chemical engineer at the same institution, contributed to the development of the polymer synthesis protocol.
Potential implications
The ability to switch a coating on and off with temperature opens avenues for reusable waterproof fabrics, temporary protective layers, and smart packaging that reacts to heat. Because the process avoids liquid waste, it aligns with sustainability goals in material manufacturing.
Why it matters
Reversible sublimation offers a novel route to create and recycle functional surfaces without chemical solvents or permanent waste. Industries that rely on temporary barriers—such as medical devices, food packaging, and aerospace—could benefit from a material that restores itself simply by cooling.
Frequently asked questions
What is the name of the polymer?
The polymer is called poly(1,2‑dithiolane).
At what temperature does it sublimate?
It sublimates at approximately 90 °C.
Which institution conducted the research?
The study was performed at the University of Surrey in the United Kingdom.
Who led the study?
The lead author is chemical engineer Touseef Kazmi, with Peter Roth also contributing.
How was the reversible behavior demonstrated?
A coating applied to rolled‑up filter paper lost its waterproof property when heated and regained it after cooling, showing the polymer’s ability to vaporize and reassemble.
Bottom Line
Poly(1,2‑dithiolane) represents a breakthrough in polymer science by vaporizing at modest temperatures and reconstituting itself without a liquid stage, a capability demonstrated through a reversible waterproof coating on filter paper. The discovery, led by Touseef Kazmi and Peter Roth at the University of Surrey, could influence future designs of reusable and self‑healing materials.
Reporting based on: original source.
Comments
Post a Comment